|
Cabling Caterpillars
The electric motor driven units are used for construction of power or telecom cables with large diameter.
The
flank caterpillars drive the cables forwards, which eliminates damage of insulation.
The caterpillars of Cat. No. 21101 and 21102 are on one side, those of 20013 are at the
central position.
| Cat. No. |
Model |
Motor Power
(kW) |
Cable Dia. (mm) |
Rated Pull
(kN) |
Cable Speed (m/min） |
Weight (kg) |
| 21101 |
DLSSJ3 |
0.75 |
φ60-120 |
2.5 |
6.5 |
165 |
| 21102 |
DLSSJ5 |
1.5 |
φ60-140 |
5 |
6.5 |
205 |
| 21103 |
DLSSJ5A |
0.75*2 |
φ60-150 |
5 |
6.5 |
176 |
Used to work with "Caterpillar Cable Conveyer" for pulling cables. Located
near the manhole at the pulling end in cable laying applications. Power source voltage AC 380V.
| Cat. No. |
Continuous Pull (kN) |
Cable Speed (m/min) |
Power (kW) |
Dimensions (mm) |
Weight (kg) |
| 21121 |
10 |
6.5 |
2.2 |
760×400×450 |
118 |
| 21122 |
20 |
6.5 |
4 |
900×450×480 |
150 |
Used to draw the cable into the duct in URD cable laying applications.
|
 |
Continuous Pull:
Cable Speed:
Steel Rope Dia.:
Rope Capacity:
GAS Engine:
Dimensions:
Weight:
Cat. No. |
20kN
0-14m/min
9.3mm
600m
13hp/1800rpm
3270×1130×1650mm
650kg
21131 |
|
 |
|
|
